USB Cordless Hot Glue Gun with 30 Pcs Glue Sticks Sturdily Bonds Metal Wood

Description

An excellent project starts with a wonderful hot glue gun with glue sticks.
Drip-free Nozzle & Leak-Proof Ring
— Can effectively avoid the situation of spills and prevent leakage of the glue.
Long Standby Time
— 2200mAh Lithium-ion battery ensures a long standby time.
1 Min Fast Preheating
— Update smart temperature control design enables it to remain constant temperature.
Automatic power-off system
— It will power off after 10 minutes for safety and saving power.
Safety Design
— The PTC heating component and the built-in fuse ensure that you can work with it safely. By automatically controlling the temperature, the mini hot glue gun can keep the temperature constant and prevent overheating.
EASY TO USE !
Follow these steps and enjoy your wonderful crafting!
- 1. Insert the glue stick.
- 2. Press and hold the switch for 2 seconds. Red light and green light shine at the same time.
- 3. After 1 minute, the red light will change to green. The equipment is ready.
- 4. Pull the joystick to start. (It is forbidden to remove the remaining glue sticks during use.)
- 5. Press and hold the switch for 2 seconds to turn it off. (In the process of crafting, the glue gun will automatically turn off in 10 minutes of inactivity to protect the safety of the user.)
- 6. The red light is on when charging; the green light is on when fully charged. The red light is on when there is no electricity. The red light flashes 3 times and then goes out.
Attention:
- 1. The product uses a charger with output voltage of 5V and current of 1-2A, so it requires the voltage and current to meet the needs and if the actual voltage and current are lower than this standard, it will spend more hours charging.
- 2. Do not remove the remaining glue sticks or pull out the unused glue stick during use , it will damage the glue gun. Besides, the glue stick can be only be replaced after the glue gun is power off.
- 3. When the glue stick is not long enough to advance, you need to add a new glue stick.
- 4. Remember to turn off the power when not in use.
- 5. When the glue gun needs to be placed during work, first put down the bracket and then stand it on a flat surface.
- 6. Do not directly touch the nozzle and hot glue during use to avoid scalding.
Automatic Power-Off System
With upgraded technology, we add a intelligent safety system for hot glue gun, so it will power off automatically after 10 minutes of inactivity to protect the safety of the user and save energy simultaneously. In the the process of crafting, if it automatically shuts down in 10 minutes of inactivity ,it is normal and you just need to turn on again.
Long Standby Time
Compared to lots of glue guns with cords, our hot glue gun kit is more convenient, it uses a charger with an output voltage of 5V and current of 1-2A and is equipped with an upgraded 2200mAh premium lithium-ion battery, so it only takes 2 hours to fully charge and can work for up to 100 minutes.
3 Protective Finger Caps
Comes with 3 finger covers in different sizes to fit your thumb, index finger and middle finger. Made of safe silicone they can withstand high temperature and prevent scalding. On the other hand, it requires glue sticks with a diameter of 7mm or less, and when it occurs the glue sticks remain in the glue gun and could not remove, just need to use a diameter of stick that is less than 6mm to remove.
WARM TIPS