SOLAFANS 48V 65A MPPT Solar Charge Controller 12V 24V 48V Auto DC150V PV 3560W

Description

Features
Certification: CE, PSE and METI Registration; Iron shell and aluminum cooling plate can help the dissipate heat effectively; The internal layout is neat to avoid interference between components.
Batteries support: lead acid, sealed, Gel, AGM, lithium battery etc; 12V 24V 48V Automatic Identification, Max solar panel input working voltage range DC150V, MAX input PV panel power 3560W.
It can keep the maximum power charge, the conversion efficient rate up to 98.1%, power consumption lower than 0.7W; PV modules utilization rate ≤99.9%; Static power is ≤2W; Noise is ≤50dB.
The charging models are MPPT, equalizing charge, floating charge; Protection: over charge, over discharge,reverse connection, over voltage, short circuit, high temperature, low or over voltage input recovery etc.
Easy installation; LCD display: PV input voltage, battery type, battery voltage, charge current, daily generation, total generation, language and date, charge status, fault record query, and power curve etc.
Basic details
● SF4865B
● Material: Iron
● 48V 65A (DC18V - DC150V)
● N.W.: 3.1 KG, G.W.: 3.5KG
● 206*82*250mm (8.1"*3.2"*9.88")
PV input voltage range (Auto)
● 12V (DC18V - DC150V)  24V (DC36V - DC150V)  48V (DC60V - DC150V)
65A MAX input PV power
● 12V (890W), 24V (1780W), 48V (3560W)
Technical Parameter
● 12V 24V 48V AUTO
● Charging mode: Constant current, Equalizing charging, float charging
● Software start-up time: ≤ 10s
● Batteries support: lead acid, sealed, Gel, AGM, lithium battery etc.
● Temperature coefficient: ±0.02% / ℃
● Automatic temperature compensation: 14.2V - (highest temperature -25℃) * 0.3%
● Temperature protection: 85℃ (when the working temperature over 80℃, it will reduce output power. and when when working temperature over 85℃, this unit will stop PV power input till the temperature down to the normal working temperature, this unit will re-start pv power input automatically )
● Noise: ≤50dB
● Smell: No harmful smell
● Environment requirement: Meet 2002/95/EC standard: no cadmium, cyanide and fluoride
● Humidity: 0 ~90% RH (not condensation)
● Altitude: 0~3000m
● Environment temperature: -20℃ ~ +40℃
● Storage temperature: -40℃ ~ +70℃
● Atmospheric pressure: 70~106kPa
● Protection: over charge, over discharge,reverse connection, over voltage, short circuit, high temperature etc.
● LCD display: PV input voltage, battery type, battery voltage, charge current, daily generation, total generation, language and date, charge status, fault record query, and power curve etc.
Application (Off grid solar power system)
● House, office, small factory, motorhome, island, base communication, bus station,  farm etc.
safety instructions
● Before install this MPPT unit, please read all instructions and warning signs in user manual
● Make sure the existing wires and wire size are in good conditions
● Do not disassemble this MPPT solar charge controller by yourself
● Keep away from flammable and explosive materials in order to avoid fire
● The installation location should be keep away from moisture or corrosive substances
● The technician must use the insulation tool to operate this equipment
● Warranty: 2 Years
CE & PSE certification, METI registration