-40%
Renogy 30A 12V Wanderer Li Common Negative Ground Solar Charge Controller PWM
Renogy 30A 12V Wanderer Li Common Negative Ground Solar Charge Controller PWM
Renogy 30A 12V Wanderer Li Common Negative Ground Solar Charge Controller PWM
Renogy 30A 12V Wanderer Li Common Negative Ground Solar Charge Controller PWM
Renogy 30A 12V Wanderer Li Common Negative Ground Solar Charge Controller PWM
Renogy 30A 12V Wanderer Li Common Negative Ground Solar Charge Controller PWM
Renogy 30A 12V Wanderer Li Common Negative Ground Solar Charge Controller PWM

Renogy 30A 12V Wanderer Li Common Negative Ground Solar Charge Controller PWM

$ 21.11

Availability: 30 in stock
  • Power Source: Solar
  • Storage Temperature: -31°F - 176°F
  • Protection Properties: Overvoltage alarm
  • Custom Bundle: No
  • Brand: Renogy
  • Working Temperature: -20°F - 113°F
  • Condition: New
  • Max Gauge Size: Up to 8AWG
  • Temperature Compensation: -3mV/°C/2V
  • Boost Duration: 120 min
  • Nominal Voltage: 12 VDC
  • System Configuration: Off-Grid
  • Enclosure: IP20
  • MPN: RNGCTRLWND30LI
  • Self-Consumption: below 10mA
  • Cell Quantity: 1
  • Item must be returned within: 30 Days
  • Type: Solar Charge Controller
  • Max. PV Input Power: 400W
  • Rated Charge Current: 30A
  • Color: White
  • Restocking Fee: No
  • Model: Charge Controller
  • Max. PV Input Voltage: 25 VDC
  • Power: Less Than 100 W
  • Refund will be given as: Money back or replacement (buyer's choice)
  • Voltage: 12V
  • High Voltage Disconnect: 16V
  • All returns accepted: Returns Accepted
  • Return shipping will be paid by: Buyer

    Description

    Our Store
    Seller Profile
    Feedback
    Shipping&Returns
    Contact
    - Renogy Wanderer Li 30A PWM Charge Controller -
    Description
    The Renogy Wanderer-Li is a 30A PWM solar charge controller that integrates efficient PWM charging to increase battery life and improve system performance. This newly improved model has two advanced features: an RS232 port and Lithium battery charging. With the addition of the RS232 port, users can now connect and communicate with the Renogy BT-1 Bluetooth module. By adding the BT-1 to the Wanderer-Li, you can now use the smartphone app, DC Home, to monitor and adjust your solar system remotely. With the inclusion of the Lithium Battery Mode, the 30A negative-ground controller is now capable of charging various 12V battery types and banks.
    Installation Notes:
    The default starting position of the Wanderer controller terminal hatches are closed (in the UP position) that could mistakenly look like an open wire hatch. Make sure to FIRST lower each terminal hatch by screwing the terminals counterclockwise to expose the wire terminal hatch to the open position. THEN secure each cable by rotating the screws clockwise to the closed position.
    Simple Install:
    Fully open the hatch (CCW), insert the appropriate wires, and completely close the hatch (CW).
    Specification
    Nominal Voltage: 12 VDC
    Max. PV Input Power: 400W
    Rated Charge Current: 30A
    Max. PV Input Voltage: 25 VDC
    Max Gauge Size: Up to 8AWG
    Dimensions: 6.45 x 4.31 x 1.76 inches
    Weight: 0.65 lbs
    Optimized for a 12V system; Deep cycle Sealed, Gel, Flooded, and Lithium battery option ready.
    Smart 4 Stage PWM charging (Bulk, Boost, Float, and Equalization) and temperature compensation increases battery life and improves system performance.
    Intelligent protection against reverse polarity, overcharging, short-circuit, and reverse current. Multiple LED indicators for easy to read charge status and battery information.
    Integrated RS232 port allows communication with BT-1 Bluetooth module and usage of DC Home smartphone app.