-40%
OOYCYOO 20A MPPT 12-24V Solar Panel Battery Regulator Charge Controller T20 LCD
$ 15.83
- Description
- Size Guide
Description
OEM LCD Display 20A MPPT 12V/24V Solar Panel Battery Regulator Charge Controller without Any Logo On Surface T20 LCD WholesalesT10,T20 10A 20A Solar Charge Controller Dual timer
This is a three-time controller into the evening working time,an interval of rest of pause time,Dawn working time(morning light function), the user can according to their needs,set a different time
Package including:
1.1PCS 20A Solar Contorler T20
2.1PCS User Manual
3. Temperature Sensor
Only One Screen to show all the charging information.
A:time(evening working) B:time(pause working) C:time(dawn working)
This is a compatible MPPT charge controller PWM intelligent / efficient / energy saving, he not only has efficient MPPT controller charging function to automatically track the maximum power point, 10% -30% higher than the ordinary controller charging efficiency, also has standby energy saving, more than 30% energy than ordinary controller, the standby power consumption of only 10mA-15mA.
Product introduction
LCD screen display
Battery reverse discharge protection
Easy operation interface
Battery reverse polarity protection
MPPT+ PWM charging mode
Battery under voltage protection
Parameter user can reset Overload
Short-circuit protection
A key to restore the factory settings
USB 5V charging (for 500mA) for mobile phone(Only for T30)
A key to open and close the load
Automatic temperature compensation function
Dual Timer function
Data Sheet:
Parameters / Model
T10
T20
T30
T40
Maximum power current
12A
20A
30A
40A
Installation Lin mm2
4mm2
8mm2
10mm2
12mm2
Installation Line(AWG)
10(AWG)
8(AWG)
7(AWG)
6(AWG)
Weight
280g
300g
475g
480
Dimensions
143×89×46 mm
187*97*61 mm
System load loss
≤13mA
Loop Buck
≤100mV
Specification
Battery float voltage
13.8V 12V system /27.6V 24V system
Battery under voltage) protection
10.6V 12V system /21.2V 24V system
Battery (under voltage) recovery voltage
12.6V 12V system /25.2V 24V system
Charge mode
MPPT+PWM MODE
Operating Temperature
-10~60°C
Storage Temperature
-30~70°C
Humidity requirements
≤90%, No condensation
Temperature compensation
-4mV/Cell/°C
Temperature Probe (built components)
NTC 100K thermistats
Maximum open circuit voltage of the solar panel
18V-24V 12V system 36V-48V 24V system)
Solar panels maximum open circuit voltage (V)
≤48V
(Cases) 12V system standard configuration
The peak voltage of the solar cell panel
18V-25V
18V-25V
18V-25V
18V-25V
Peak power of solar cell panel
50W-130W
100W-260W
200W-380W
≤500W
Model
T10
T20
T30
T40
Battery standard voltage
12V
12V
12V
12V
Battery capacity
≥100AH
≥200AH
≥300AH
≥400AH
Installation Lin mm2
4mm2
8mm2
10mm2
12mm2
Installation Line(AWG)
10(AWG)
8(AWG)
7(AWG)
6(AWG)