GCSOAR MPPT Solar Charge Controller 40A 12V/24V Max PV 100V + Bluetooth Module

Description

G
CSOAR Mppt Solar Charge Controller
4
0A 12V/24V Auto
Max PV 100V
Common Negative Ground Regulator + Built-in Bluetooth Module (
APP
Programmable ) LCD Display Compatible with Lithium Sealed Gel
Flooded Batteries (GCMT
4
010E-BT)
GCSOAR MPPT Solar Charge Controller (Built-in Bluetooth Module APP Programmable) : Max Input Current: 40A, 12V/24V auto identifying system voltage. Max Input Solar Power: 520W(12V) or 1040W(24V); Max input Voltage 100V; Auto control system to limit the charging power & current go over the rated value.
Outstanding Performance:This mppt charge controller with tracking efficiency >99.9%. Full digital technology, high charge conversion effciency up to 98%. 4-stage charging (MPPT, Boost, Float, and Equalization) maximizing get more energy from solar panels into your battery. Real-time energy recording and statistical with Multiple load control modes.
Built-in Bluetooth Mode: this mppt charge controller work with Bluetooth module, which can pair with Android or iOS APP (Solar life) to monitor and set parameters about solar panels/ battery/ load. Monthly charging data can be caculated and displayed by grouping and graphs.
Battery Type & Load Mode: Compatible with Lithium Sealed Gel, Liquid AGM Batteries. Multiple load control modes: Always on, Dusk to Dawn, Evening and Manual. You can set these parameters by controller setting or APP (Solar life).
Ten Electronic Protection:PV over current protection/ PV short circuit protection/ PV reverse polarity protection/ Battery reverse polarity protection/ Battery over voltage protection/ Battery over discharge protection/ Load over current protection/ Load short circuit protection/ Over temperature protection/ Damaged remote temperature sensor protaction. Any questions please feel free to contact with us by Amazon email , we could supply free technical support and aftersale services in time .
Technical Data:
Model: GCMT4010E-BT
(
Built-in Bluetooth Module, support setting and monitoring by APP )
Rated charge and discharge current :40 Amp
Nominal system voltage:12V/24V DC auto work
Max. PV input power: 520W solar panels charge for 12V battery system / 1040W solar panels charge for 24V battery system
Max. PV open circuit voltage:100V(at minimum operating environment temperature) 92V(at 25℃ environment temperature)
Battery type :
Lead-acid, Lithium and User-defined
.
( Sealed /GEL(AGM)/Flooded; LiFePO4/ Li[NiCoMn]O2 ; User ), (AGM battery setting same as GEL parameters, or more accurate parameters follow battery factory advice by User type )
Battery voltage range : 8～32V
MPP voltage range:V(BAT+2V)～72V
Grounding : Common negative
Communication: BlueTooth
Load Work Mode :Always on, Dusk to Dawn, Evening, Manual
Tracking efficiency : ≥99.6% , Max. conversion efficiency :98%
Working environment temperature : -25℃～+50℃(100% input and output)
Temperature: -20°C -- +70°C/-4°F -- 158°F
Controller Terminals:#6 AWG(16mm2) ; Recommended Wire cable:#6 AWG(16mm2)
Dimension:189*255*69mm ; weight :1.56 KG
Package List:
1 X 40A MPPT Solar Charge Controller
6 X Wire terminnal Connectors
1 X Temperature sensor cable
1 X Manual (English)
Via Controller Setting Buttons ;
Via Phone APP
(Solar life)
[ Android or IOS] (bulid-in Bluetooth Module setting parameters ) ;
Please watch Youtube video :
How to set parameters for GCSOAR MPPT charge controller ?
Steps: Please connect solar system in the order of 1.battery--> 2. load--> 3.PV array ; and disconnect solar system in the reverse order 3. 2. 1.