EPSolar XTRA2210N MPPT Solar Charge Controller 20A 12/24V Max. PV Voltage 100V

Description

EPEVER / EPSOLAR XTRA2210N
MPPT Solar Charge Controller 20A 12/24V Max. PV Voltage 100V
XTRA series are advanced maximum power point tracking (MPPT) charge controllers, for off-grid photovoltaic systems.
In order to maximize the energy harvest from PV arrays and simultaneously minimize the power loss within a wide range of operating conditions, XTRA series apply an advanced smart algorithm which results in up to 30% higher efficient charging, compared to a conventional pulse width modulation (PWM) charge controller.
Xtra series controller have limit protection function on charging current &charging power, as well as auto derating power operation at high temperature; the above protection ensure the stability of system even at exceeded rated PV power and over temperature conditions.
Protection class IP32 and isolated RS485 communication port further improve the controller’s reliability under different application requirements.
XTRA series controllers incorporate a self-adaptive three-stage charging algorithm based on a digital control circuit, which effectively prolongs the lifespan of battery and significantly improve the system performance. It also has extensive electronic protection for overcharge, over discharge, PV & battery reverse polarity and etc. to ensure the sustainability and durability of the off-grid solar system.
Features:
Advanced MPPT technology & ultra-fast tracking speed is up to 99.5 % guaranteed
Maximum DC/DC transfer efficiency is as high as 98 %, full load transfer efficiency is up to 97.4 %
Wide MPP operating voltage range Low temperature protection and self activate function for lithium battery charging
Limit charging power & current over rated range
Real-time energy statistics function Multiple load work modes
Comprehensive electronic protection
Compatible with lead acid and lithium-ion batteries
Over temperature protection and power degrading in higher temperature
High quality and low failure rate components of ST or IR to ensure service life
Isolated RS485 communication port with 5V/200mA protected output, with standard Modbus protocol
Monitor and set the parameters via APP or PC software
Dustproof and waterproof design with IP32 protection class
CE certification (LVD IEC62109, EMC EN3/1-6-61000)
If using Lithium battery,customer should ask help for “PCsoftware” to set the lithium battery parameters
Ingress of solid objects：Protected against solid objects over 2.5mm
Ingress of liquids: Protected against falling drops of water, if the case is disposed up to 15 from vertical
Technical Specifications
Electrical
System Nominal Voltage: 20A
Rated Charge Current: 20A
Battery Voltage Range: 8～32V
Max. PV Open Circuit Voltage 100V,  92V
MPPT Voltage Range: (Battery voltage +2V)～72V
Max. PV Input Power (W/V): 260/12,  520/24
Equalization Voltage: Sealed: 14.6V; Flooded: 14.8V; User: 17~9V
Boost Voltage: Gel:14.2V; Sealed:14.4V; Flooded:14.6V; User: 17-9V
Float Voltage: Gel /Sealed /Flooded: 13.8V; User: 17~9V
Low Voltage Reconnect Voltage: Gel /Sealed /Flooded: 12.6V; User: 17~9V
Low Voltage Disconnect Voltage: Gel /Sealed /Flooded: 11.1V; User: 17~9V
Self-consumption: ≤35mA(12V),  ≤22mA(24V)
Discharge circuit voltage drop:  ≤0.23V
Temperature Compensate coefficient: -3mV/0 C/2V (Default)
Grounding: Common negative grounding
RS485 interface: 5VDC/200mA (RJ45)
LCD backlight time: 60S (Default)
Environmental
Working environment temperature (full rated power with no derating):  -25℃～+50℃(LCD)；-30℃～+50℃(No LCD)
Storage temp. range: -200 C～+700 C
Relative humidity: ≤ 95% , N.C.
Enclosure: IP33
Pollution degree: PD2
Certification
Safety: EN/IEC62109-1
EMC(Emission immunity): EN61000-6-3/EN61000-6-1
FCC: 47 CFR Part 15, Subpart B
Performance & function:  IEC62509
ROHS: IEC62321-3-1
Mechanical
Dimension (mm): 217×158×56.5
Mounting dimension (mm): 160×149
Mounting hole size:  Φ5mm
Terminal: 6 AWG (16mm2)
Recommended cable: 10 AWG (6mm2)
Weight: 0.96kg
When selecting lithium battery type, the system voltage can’t be identified automatically
At minimum operating environment temperature
At 25℃ environment temperature
When selecting lithium battery type, the temperature compensation coefficient is 0, and can’t be set
The parameters are 12V system at 25 ºC, ×2 in 24V system at 25 ºC, ×4 in 48V system at 25 ºC
The controller can full load working in the working environment temp. range, When the internal temperature reach to 81℃, the reducing charging power mode is turned on
3 - protection against solid objects: protected against solids objects over 2.5mm
2 - protection against liquids: protected against direct sprays up to 15 ° from the vertical