EPEVER 20A MPPT Solar Charge Controller 12V 24V Auto Max PV 100V Tracer2210AN

Description

(2022 Upgraded Version ) EPEVER MPPT Solar Charge Controller 20 Amp ,12V/24V DC auto work . Solar Panels Max PV 100V , Max input 260W for 12V battery or 520W for 24V battery , Common negative grounding. Suitable for Lead-acid
(Sealed / Gel(AGM) / Flooded)
; Lithium(
LiFePO4 (4s/12V; 8s/24V), Li (NiCoMn)O2 (3s/12V; 6s/24V)
) and User-defined .
Technical Data:
Model: Tracer2210AN
Rated charge and discharge current :20 Amp
Nominal system voltage:12V/24V DC auto work
Max. PV input power: 260W charge for 12V battery system / 520W charge for 24V battery system
Max. PV open circuit voltage:100V(at minimum operating environment temperature) 92V(at 25℃ environment temperature)
Battery type :
Lead-acid:
Sealed (default)/ Gel/ AGM/ Flooded / User (9～17V@12V; 18～34V@ 24V)
, Lithium:
LiFePO4 (4s/12V; 8s/24V), Li (NiCoMn)O2 (3s/12V; 6s/24V), User (9～34V)
and User-defined.
(AGM battery setting same as GEL parameters, or more accurate parameters follow battery factory advice by User type )
Battery voltage range : 8～32V
MPP voltage range:V(BAT+2V)～72V
Grounding : Common negative
Tracking efficiency : ≥99.5% , Max. conversion efficiency :98%
Working environment temperature : -25℃～+50℃(100% input and output)
Temperature: -20°C -- +70°C/-4°F -- 158°F
LCD backlight time : 60S (Default)
Controller Terminals:#6 AWG(16mm2) ; Recommended Wire cable:#10 AWG(6mm2)
Dimension:220*154*52mm ; weight :0.94 KG
Package List:
1 X 20A MPPT Solar Charge Controller (Model: Tracer2210AN )
1 X Temperature sensor unit for controller（Model: RT-MF58R47K3.81A）
1 X Manual (English)
Note :
Our warehous in
RANCHO CUCAMONGA ,CA,
our professional engineer local team supply solar system solutions and tech-support services for you in time .
2022 EPEVER Tracer-AN series mppt solar charge controller is new upgraded version , Better funcations and advanced technology .
Added Features :
Blacklight LCD Display ; More Safety Protection Functions;
Compatible with lead-acid and lithium-ion type batteries too ;
2022 Upgraded version support choose Lithium types by controller buttons directly . users can modify them on the local controller when the
battery type is "USE." for the BCV, FCV, LVD, and LVR,  You could also contact with vendor services about more tech support .
Product Features:
Based on common negative design and Advanced MPPT technology, with efficiency no less than 99.5%,Ultra-fast tracking speed and tracking efficiency ;
With the adaptive three-stage charging mode based on digital control circuit, Tracer-AN series controllers can effectively prolong the life-cycle of battery and significantly improve the system performance. The load, utility or generator auto-control relays make it easy to compose the hybrid power system;
All-around electronic protections, including overcharging, over discharging, PV reverse polarity protection, effectively ensure the safer and more reliable operation of the solar system for longer service time;
The isolated RS485 interface with standard MODBUS communication protocol, easy for customer to monitor and set the parameters via mobile phone APP or PC software;
This modular solar controller can be widely used for different applications, e.g.solar RV, Communication base stations, household systems, and field monitoring, etc.
Protection function :
•PV Over Current/power protection • PV Short Circuit protection • PV Reverse Polarity protection
• Night Reverse Charging protection • Controller Overheating protection
• Battery Reverse Polarity protection • Battery Over Voltage protection
• Battery Over Discharge protection • Battery Overheating protection
• Lithium Battery Low Temperature protection
• Load Short Circuit protection • Load Overload protection
•TVS High Voltage Transients protection
Step: Connect solar system in the order of 1.battery--> 2. load--> 3.PV array ; and disconnect solar system in the reverse order >3. >2. >1.
Battery must be connected first ! Never connect soalr panel array to controller Without/Before connect battery.
DO NOT connect any inverter/wind/Alternator or Charger into the charge controller directly ! You should connect with battery and add fuse .
If there is a long distance between the PV array and controller or between the controller and battery, larger size wires should be used to reduce the voltage drop and improve performance. (Recommended wire size is only for reference.)
How to program for Lithium Battery parameters？
Via Remote Meter (Accessories needed: MT50)
Via Phone APP [ Android or IOS], (Accessories needed：WIFI adapter or BLE adapter )
Via PC Software (Accessories needed RS485 cable :CC-USB-RS485-150U ) , Software download : EPEVER official website or read in manual .
Please watch tutorial videos or contact vendor to get more tech-support .