Dymax Bluewave 200 Versión high-intensity, light-curing spot-lamp system

Description

Dymax Bluewave 200 Versión high-intensity, light-curing spot-lamp system. Lamp 874hrs. Unit
Dymax BlueWave® 200 version 3.0 is a high-intensity, light-curing spot-lamp system. This unit emits energy in the UVA and visible portion of the spectrum (300-450 nm) for light curing of adhesives, coatings, and encapsulants. Ideally suited for either manual or automated processes, the system contains an integral shutter which can be actuated by a foot pedal or PLC and a universal power input that provides consistent performance at any voltage. A wide range of light guides in various materials and configurations are available for use with this spot-curing unit, providing application flexibility.
The BlueWave® 200’s faceplate design has an operator interface with an easy-to-read LCD display and patented intensity adjustment control. The control is important for validating an appropriate intensity range and maintaining that range during production. Intensity measurement is easily accomplished with the Dymax ACCU-CAL™ 50 radiometer. Scheduled intensity measurements taken during the production process will indicate whether additional intensity adjustments are required. This method of measurement provides the most accurate readings as they are taken through the lightguide in the actual production setting.
System Specifications
Property Specifications
Initial intensities Total (280-450 nm) 40+ W/cm²
Visible (400-450 nm) 17+ W/cm²
UVA¹ (320-395 nm) 17+ W/cm²
UVB (280-320 nm) 7 W/cm²
Intensity adjustment Manual from 1% to 100% output
Power adjustment 100-240 VAC, 50-60 Hz, 2.5 Amps
Power supplies Solid-state, 200 Watt
Bulb 200 Watt metal-halide bulb included; replacement in less than one minute
Reflector Elliptical; glass with dichroic coating to reflect UV and minimize IR
Shutter timer Digital LCD timer up to 9,999.9 seconds; manual or timed shutter
Shutter activation Foot pedal or PLC
I/O Port 15 pin D – sub-miniature connector
Signals (PLC shutter intregration) Inputs: Shutter activate, shutter deactivate, lamp control, PLC enable
Outputs: Unit status, temperature fault, shutter fault, lamp status, power status, shutter status, lightguide status, bulb life warning, bulb life expired
Cooling Filtered fan arrangement; thermally controlled to maintain proper lamp temperature
Hour meter LCD, monochromatic, 320 x 240 px
Overall Dimensions (W x D x H) 12.5 in x 12.0 in x 6.5 in [31.8 cm x 30.5 cm x 16.5 cm]
Weight 12.75 lbs. [5.78 kg]
System Warranty One year from purchase
Bulb Warranty Ignition warranted for 2,000 hours
¹ As measured with a Dymax ACCU-CAL™ 50 Radiometer (320-395 nm). Excessive on/off cycles and improper cooling may affect bulb degradation and therefore no warranty is expressed or implied.