Cole Clark CCAN2ECBB Bunya and Blackwood Angel 2

Description

Here is a fine guitar Cole Clark, an Angel 2 with a Bunya Top and Blackwood back and sides
, one of the few available until March.
We are an authorized Cole Clark Dealer.
UNIQUE CONSTRUCTION
Cole Clark steel string acoustic guitars are the only main stream acoustic to use a Spanish heel or integral neck construction. This means the neck is glued to the face along with the sides and the back so the neck is one piece all the way to the sound hole. On other guitars, the body is made then the neck attached, mostly with a bolt or dove tail join. Due to our method, the sound is unique. Cole Clark also has a carved top and back and uses a ridge system to join the sides to the top and back instead of kerfing.
NATURAL PICKUP
The Cole Clark patented pickup system is the most acoustic sounding pickup available.
Aimed at finding a more natural tone when amplified and eliminating piezo ‘quack’, our pickups comprise different elements that only hear certain frequencies which they’re best equipped to handle. This is done using a combination of 6 loaded piezos under the saddle for bottom end, a face sensor that can be blended in to hear frequencies in the mid to high range (350hz maximum crossover) and a condenser microphone shelved to hear only extreme highs.
TIMBERS
Cole Clark guitars are all solid timber using mostly native Australian tone woods that are largely sustainable.
Product Specifications
All solid timber full body grand auditorium with internally carved top and back.
Cole Clark 3-way pickup system
Finish: Nitrocellulose (natural satin)
Neck: Queensland Maple
Top: Solid Bunya
Back/Sides: European Maple
Inlaid timber binding and rosette.
Bridge/Fretboard: She Oak
Inlays: Snowflake
Machine Heads: Grover
Nut/Saddle: Graph Tech Tusq
Strings: Elixir – Nanoweb Phosphor Bronze 12-53
Nut Width: 44mm/1.73″
Pick guard supplied in case