Atkinson Electronics PVCM25D SunExplorer Solar Charge Controller - RV/Camper PV

Description

Used and in working condition - SunExplorer SEDM4-LC wall mounted display and PVCM25D control module
Connected with a CAT-5 cable - not included.
(This was removed from a working PV system in a camper. Reason for selling is I swapped it out with a Bluetooth enabled controller. )
From manufacturer web page:
The SunExplorer (25Amp Display Kit) charge controller handles up to 25 Amps at either 12 or 24 volts DC. It is ideally suited for RV’s, Motor homes, off-grid applications, such as small cabins, remote homes, or other off-grid applications.
The PVCM25D micro-processor based photo voltaic (PV) charge controller connects PV panel to 12V or 24VDC storage batteries. PVCM25D determines which mode to operate in, 12V or 24V, by measuring both battery and PV charge voltages. PVCM25D performs five basic functions:
Senses when the battery is fully charged and disconnects the PV charge current to avoid over-charging the battery.
Resumes charging the battery when the battery voltage has dropped sufficiently to accept additional charge current.
Checks the availability of PV charge current, by cycling the relay every 4 minutes. If there is insufficient charge current available, it will disconnect the battery to prevent discharge through the PV panels at night.
Compensates for battery temperature and adjusts the charge threshold voltages when mounted in battery case.
If the PV charge current is insufficient, it exits the charge routine to prevent battery discharge through the PV panels.
The SEDM6-25’s normal display indication is battery percent remaining and its associated LED. The select button allows the user to turn on the display’s backlight, advance to the next display setting, reset the solar Amp hour accumulator, lock display or current setting, or activate scroll mode. The SEDM4-25 will automatically switch back to the battery percent remaining display setting after 4 minutes unless the display setting lock is activated. The backlight will come on for 15 seconds any time the select button is pushed and will stay on continuously in scroll mode. The SEDM4-25 is a high quality brushed aluminum face plate.
No packaging or manuals are included. Please see all photos.
Thank you!