50 Gallon Pneumatic Mixer Horizontal Plate Rung Dope Stainless Steel Tank Barrel

Description

Specifications Material: Stainless Steel, 304 Stainless Steel Color: Silver Style: Modern Surface Treatment: Baking Varnish              Assembly Required: Yes Power: 1/2HP Stirring Capacity: 190L/50gal Speed: 50-2000RPM Working Pressure: 1-3kg/2.2-6.6lbs Gross Weight: 6kg/13.22lbs Net Weight: 5.35kg/11.8lbs Applicable Barrel Thickness: ≤24.3mm Mixing Rod Length: 88cm/34.64in Pump Length: 25.5cm/10in Impeller Diameter: 14cm/5.5in Product Length: 1.135m/3.72ft Package Size: 114*17*14.5cm/44.88*6.7*5.7in   Package Included 1*Pneumatic Mixer All Accessories for Assembly
50 Gallon Pneumatic Mixer Horizontal Plate Rung Dope Stainless Steel Tank Barrel
Description
Description
Are you still struggling to stir the raw material manually? Are you still bothered by the poor performance of electric paint mixers? Then it's time to use our pneumatic mixer. Its 1/2 HP power and maximum 2000 rpm will greatly improve the mixing efficiency. It can operate for a long time under sufficient air pressure without generating sparks, making it more durable, stable, and safer than an electric mixer.
Key Features
Highly Efficient:
Compared with traditional manual mixing tools, its 1/2 horsepower power and a maximum speed of 2000 rpm can greatly improve efficiency and save time, making mixing effective, uniform, fine, and smooth.
Uniform Mixing:
The
pneumatic mixer with a
clip provides you with flexible mixing angles and impeller heights, thereby achieving good mixing results. Equipped with self cooling effect and directional valve, it can start, stop, and rotate at any time.
High Safety:
The pneumatic motor with high starting torque can start directly under load and automatically slow down or stop according to corresponding changes. This safe,
explosion-proof
, and
spark-free
mixer gives you peace of mind.
Stepless
Speed Regulation:
This product supports
stepless
speed regulation, with flexible operation, and can easily meet the different mixing speeds of various materials.
High Strength Material:
It's mainly made of stainless steel, with high hardness and good
impact resistance
. The acid-base and
corrosion-resistant
304 stainless steel stirring rod and impeller ensure the long-term service life of the product.
Large Mixing Ability:
It can mix up to 50 gallons of paint, coatings, etc. at once. This large mixing capability is very suitable for use in high-demand factories, improving overall work efficiency.
High Stability:
The pneumatic mixer can run at a constant speed for a long time, which is more stable than electric tools. Its good sealing performance is suitable for various harsh environments, such as flammable, explosive, high temperature, humid, etc.
Easy to Maintain:
The impellers are designed to be detachable, allowing you to disassemble them for cleaning, which is very convenient. It also eliminates the hassle of replacing carbon brushes, making maintenance easier.
Details
Convenient Clip:
It comes with a clip that allows you to secure it to the barrel wall with a wall thickness of 24.3mm or less, so you don't need to constantly support it with your hands, which is very convenient and labor-saving.
Curved Impellers:
The curved impellers can drive more materials during rotation, making the mixing more uniform and effective.
Silencer:
The built-in silencer can keep the noise during operation at a lower level, creating a quieter working environment.
Application
This product is suitable for mixing, dilution, dissolution, reaction, emulsification, dispersion, turbidity, sedimentation prevention, etc. of liquid-liquid and solid-liquid. It is especially suitable for mixing the paint of mixed air spraying; It applies to the chemical industry, petrochemical industry, coating, daily chemical industry, ceramics, mining, water treatment, food beverage, medicine, paper making, electronics, textile, construction, automobile, and furniture industries.
Specifications
Material: Stainless Steel, 304 Stainless Steel
Color: Silver
Style: Modern
Surface Treatment: Baking Varnish
Assembly Required: Yes
Power: 1/2HP
Stirring Capacity: 190L/50gal
Speed: 50-2000RPM
Working Pressure: 1-3kg/2.2-6.6lbs
Gross Weight: 6kg/13.22lbs
Net Weight: 5.35kg/11.8lbs
Applicable Barrel Thickness: ≤24.3mm
Mixing Rod Length: 88cm/34.64in
Pump Length: 25.5cm/10in
Impeller Diameter: 14cm/5.5in
Product Length: 1.135m/3.72ft
Package Size: 114*17*14.5cm/44.88*6.7*5.7in
Package Included
1*Pneumatic Mixer
All Accessories for Assembly
Notes
The air source of the air compressor used by the customer needs to be installed with an oil-water separator before use, otherwise, a lot of moisture in the air will run into the motor, resulting in the machine being stuck.
Please note that excessively viscous materials should not be mixed with this product, as this may cause damage to the product.
Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement, and make sure you do not mind before you order.
Payment
Delivery details
Terms of sales
About us
Contact us
Payment
We accept ebay payment 。
Fees such as import duties, taxes are not included in the item price or shipping costs. These charges are the buyer's responsibility.
Delivery details
Shipping:
2-9 working days to: USA
Terms of sales
We maintain high standards of excellence and strive for hundred percent customer satisfaction. Feedback is very important to us. We hope that you contact us immediately before you give neutral or negative feedback, so that we can address your concerns. It is impossible to address issues if we do not know about them!
About us
Your satis
faction is our ultimate goal. We work hard to earn your trust and future business. Our certified technicians have tested each item before shipping. The unit comes with 1 year limited warranty on all manufacturing defects.
a) If you receive a defective item, you may return it or ask for a discount. Please contact us within 14 days after you receive the package.
b) What you returned must be intact and in its original packaging as re? u. Customer is responsible for shipping costs of the returned item.
c) We will cover the cost of shipping back t with the shipping rate indicated in the registration page. We will send you a new unit or refund the full payment you paid.
Thank you.
Contact us
Business Hour
Business Hour: Monday To Friday: 8:30 AM to 5:00 PM (Beijing China time)
Due to time zones, our reply to your questions may not be immediately. But within above working time, we will reply your email within 24 hours. If it's non-workdays, please kindly be patient and wait till Monday.
Please contact us with ebay message.
Please feel free to contact us if you have any questions.
Monday To Friday: 8:30 AM to 5:00 PM (Beijing China time)
Due to time zones, our reply to your questions may not be immediately. But within above working time, we will reply your email within 24 hours. If it's non-workdays, please kindly be patient and wait till Monday.
Please contact us with ebay message.
Please feel free to contact us if you have any questions.
On Jun 19, 2024 at 02:04:12 PDT, seller added the following information: