14PCS 4.5 x 7/8 Inch Flap Discs Cutting Cut off Wheel 40 60 80 120 Grit Assorted

Description

Product Description
T27 Resin-bonded Zirconia Alumina Flap Discs
LotFancy flap discs are made from zirconia alumina, designed for high speed sanding and heavy duty removal, delivering fast and long lasting cut.
Zirconia alumina abrasive provides extended service life and more cutting power than aluminum oxide, saving replacement costs and sanding time.
They are durable, heat-resistant, moisture-resistant, anti-static and anti-clogging.
Bonded with fiberglass backing to absorb tool vibration and offer additional durability and reinforcement.
Overlapped abrasive strips offer more efficient sanding effect and longer service life than conventional fiber discs.
4-1/2”x0.045”x7/8” Metal Cutting Disc
LotFancy Cutting Wheels are made from aluminum oxide abrasive, combined with 2 full sheets of fiberglass mesh and hard resin bond matrix, to ensure aggressive cutting action and durable long life wheels.
Metal Cutting Wheels have a thin 0.045-Inch cutting edge, designed for fast burr free cutting.
Our cutting discs offer a long service life, require less force to complete each cut, and maximize cutting capacity at a fraction of the cost.
This cut off wheels can be used to cut through all types of ferrous metals and stainless steel, including rebar, steel pipe, structural & galvanized steel, sheet metal, structural tubing, black steel, cable and small to medium diameter solid pieces.
Compatibility
Fit both air and electric Angle Grinders, such as:
Bosch 1375A, GWS8-45, AG40-11PD, GWS10-45P, GWS9-45, AG40-85PD, CAG180B, GWS10-45
Makita 9557PBX, 9564PC, 9564CV, GA4534
DEWALT DCG414B, DWE402, DCG413B
PORTER-CABLE PC60TAG, PCE810, PC60TPAG, PC750AG
Black & Decker BDEG400, G950, 7750, G850
Hitachi G12SS2, G12SR4, G12SQ
Tacklife AGK31AC
Specification
Flap Disc Material: Zirconia Alumina Abrasives
Cutting Wheel Material: Aluminum Alumina Abrasives
Flap Disc Grade: 40/60/80/120 Grit
Size: 4.5” x 7/8”
Maximum speed: 13300RPM
Quantity: Total 14PCS, including
2x 40 Grit, 2x 60 Grit, 2 x 80 Grit, 2 x 120 grit Flap discs
6 x cut off wheels
Warm Tips
When cutting, consider applying the proper amount of pressure at a 90 degree angle to allow the cutting wheel to do the work.
For best results, consider not pushing too hard on the wheel, which may cause the grinder to stall or kick back or give a less efficient cutting action, while also increasing the possibilities of slippage or loss of control of the tool, resulting in injury or damage.
Consider using light pressure and a consistent motion throughout the cut for the fastest cut-rate and prolonged wheel life. Excessive pressure through the cut causes increased friction and heat build-up, which can cause increased heat discoloration of the work piece and reduced wheel life.
For demanding applications, higher amperage &/or torque angle grinders provide easier, long-lasting & efficient cuts.