-40%

100A 12V 24V MPPT Solar Charge Controller Home Solar Panel Battery Regulator

$ 13.17

Availability: 83 in stock
  • Condition: New
  • Type: Solar Charge Controller
  • Current Output: 100 A
  • Current Rating: 100 A
  • Brand: Unbranded
  • Voltage: 12V/24V

    Description

    Size: 100a
    Features:
    1. Industrial-grade master chip, 16 AD sampling accuracy, temperature, charging current,
    Discharge current accurate real-time display, power generation at a glance.
    2. Automatic focusing MPPT tracking charging, high charging efficiency, non-stop detection
    During charging, bidirectional focusing tracking.
    3. Large-screen LCD display, adjustable charging and discharging parameters. UItra-wide charge
    And discharge adjustable, as long as you understand the characteristics of the battery set its
    Corresponding charging parameters, you can charge a battery. When the output is off, the time
    Can be adjusted, which is more convenient.
    4. Acomplete three-phase charge management, effectively protect the battery, the battery is more
    Durable.
    5. Built-in overheating, overcurrent short circuit, open circuit protection, reverse connection
    Protection,when the fault is eliminated, the controller automatically recovers, does not damage
    The device.
    6. Bidirectional MoS tube anti-backflow circuit, high-power charging mode, ultra-low heat.
    7. R5. 0 solar charging DC plug, R5. 0 DC lamp output DC plug, convenient connection.
    Description
    Category: Solar Battery Charge Controller
    System voltage: 12V/24V adaptive
    Rated charging current: 5A/10A/40A/50A/100A
    Rated discharge current: 5A/10A/40A/50A/100A
    Max. PV input power: 750W(12V) / 1500W(24V)
    Maximum photovoltaic voltage <50V
    Increase charging voltage: 14.4V (sealed type) / 14.2V (colloid type) / 14.6V (open type)
    Floating charge voltage: 13.7V (default, adjustable)
    Discharge cut-off voltage: 10.7V (default, adjustable)
    Discharge recovery voltage: 12.6V (default, adjustable)
    USB output: 5V/3A
    Standby current: <10mA
    Working temperature: -35 to +60 degrees
    Function:
    1. Always keep the battery on fill voltage condition.
    2. Prevent the battery from over-charging.
    3. Prevent the battery from over-discharging.
    4. Prevent the battery from reverse charging to solar panels during
    Nights.
    5. Reverse Polarity Protection for Battery
    6. Reverse Polarity Protection for Solar Panels
    7. When the battery voltage is low, the controller will
    Automatically cut off the load from the system. If the voltage of
    Battery is back to normal and the load will restart working.
    8. Thunder protection
    9. According to the battery voltage grade, the controller can
    Automatically set charge-off voltage, the load-off voltage, the
    Load- restore voltage. (The parameter is default under 25?
    Condition, locked by the CPU procedure, cannot adjust.)
    10. The controller will automatically compensate the temperature of
    The charging voltage according to the changes of ambient temperature.
    ?Package Includes:
    1 X Solar Panels Battery Charge Controller
    1 X User Manual